V-Series Unvalved Male Coupler

Atributos

Presión de Operación Máxima	9000 PSI (620 bar)
Peso	0.62 lb
Compra Minima	1
Paquete Opcional/Cantidad por Caja	1
Material	Acero
DE Máximo
Rosca	Macho NPTF
Sello	Nitrilo
Tamaño de Cuerpo
Rango de Temperatura	6" grooved manifold with six 2" female NT ports, one 1" NPT port (left or right version)°F (Not pressure retaining, open flow only°C)
Presión de Reventón
Medida de Rosca
Longitud
Hex
Flujo	DELTA P=22 PSI 30 GPM

Detalles

Opciones disponibles

Contact Dixon for all available option adders
Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone
Las opciones de sello Kalrez® incluyen: 4079, 6375 y 7075
Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel
Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged
Oxy-clean treatment is available

Compatibilidad e Intercambio de Datos

Interchangeable to MIL-C-51234
Snap-Tite H and Faster TNV

Construcción

Machined components are manufactured using solid bar stock
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Steel coupler sleeves are hardened to resist deformation and maximize service life.
Nitrile (Nitrile Rubber) seals are standard
All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage.

Características

General purpose hydraulic quick-connect provides superior flow characteristics with built-in reliability

Nota

Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation.

Recursos