Serie-M Niple Intercambio ARO (Push-Loc)

Atributos

Peso	0.035 lb
Compra Minima	1
Paquete Opcional/Cantidad por Caja	1
Material	Acero
DE Máximo	0.56"
Tamaño de Cuerpo	1/4"
Rango de Temperatura	-40°F a 250°F (-40°C a 120°C)
Longitud	2.00"
DI de Manguera	3/8"
Valor de Presión	See Product Details

Detalles

Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Rated pressure for connected Auto Steel Coupler & Steel Plug: 300 PSI (20 bar) Maximum Working and 2,600 PSI (179 bar) Burst
Rated pressure for connected Manual Steel Coupler & Steel Plug: 300 PSI (20 bar) Maximum Working and 12,400 PSI (855 bar) Burst

Recursos

Learning Video

Catalog Page

M2S3 - Serie-M Niple Intercambio ARO (Push-Loc)