Conexiones Push-On Hembra NPTF x Barbas para Manguera

2740812CBC - Conexiones Push-On Hembra NPTF x Barbas para Manguera

Dixon Distributor?

Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.

Atributos
Detalles
Recursos
Productos Relacionados

Atributos

Peso	0.202 lb
Compra Minima	1
Paquete Opcional/Cantidad por Caja	1
Material	Latón
Material de Componentes	Tapa de latón
Rosca Hembra	NPTF
Rango de Temperatura	Auto-locking sleeve°F
Longitud
DI de Manguera
Hex
Valor de Presión	350 PSI
Tamaño de Rosca Hembra	3/4"-14

Detalles

Construcción

Dryseal

Instalación

Assembly Instructions:
1. Trim hose end with smooth square cut.
2. Lubricate either push-on fitting, hose or both.
3. Insert push-on fitting into hose until first barb is in hose.
4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instrucciones

Disassembly instructions:
1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Nota

No hose clamps or ferrules are needed

Notas de Seguridad

Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Especificaciones

Number of Barbs: 2
Barb Length: 1.02"

Advertencia: Los productos Dixon pueden contener químicos identificados por el estado de California como causantes de cáncer, defectos de nacimiento, o problemas de reproducción.